Help keep 4tan around! BTC: 1DN5x5C1NZs3stF413g4jsajdv283X4Khr

Tiny Housing

No.1195396 View ViewReplyOriginalReport
Let's say I owned 5 acres of land in Georgia.
Let's say I wanted to construct, or partially construct, a livable space - large enough to fit a bed, small kitchen area, small washroom space and a place to fit a computer. Would have plumbing and power. AC could be handled myself.
Let's say I didn't care for lots of bells and whistles.
Since it classifies as a home, how small a "house" could I make myself (or assisted with contractors) either from scratch or using a prebuilt structure like a large shed without building codes fucking my asshole?
I want a livable space that's cheaper than an apartment. As it stands my expendable money a month is $450, and that's before food costs; there are no apartments worth dying in below $550.
What are my options?
32 posts and 6 images omitted

How do I fix a door that sticks

No.1198251 View ViewReplyOriginalReport
i shimmed the hinges but it didn't make a differnece.
8 posts and 2 images omitted

/ohm/ - electronics general

No.1191510 View ViewReplyLast 50OriginalReport
last >>1183261

Thread music: [Embed]

>I'm new to electronics, where to get started?
There are several good books and YouTube channels that are commonly recommended for beginners and those wanting to learn more, many with advanced techniques. The best way to get involved in electronics is just to make stuff. Don't be afraid to get your hands dirty.

>What books are there?

Getting Started in Electronics Forrest Mims III
Make: Electronics Charles Platt
How to Diagnose Fix Everything Electronic Michael Jay Greier

All New Electronics Self-Teaching Guide: Kybett, Boysen
Practical Electronics for Inventors: Paul Scherz and Simon Monk

The Art of Electronics by Paul Horowitz

>What YouTube channels are there?

>What websites feature electronics projects or ideas?

>Where do I get components and lab equipment from?

>What circuit sim software do you use?
This mostly comes down to personal preference. These are the most common ones though:
NI Multisim
iCircuit for Macs

>What software should I use to layout boards?
Circuit Wizard
319 posts and 83 images omitted

No.1198235 View ViewReplyOriginalReport
Can anyone point in the direction of a comprehensive guide on bending copper tube in 15mm & 22mm?

I'm going to be replacing my bathroom soon and I would like to utilize as many bends as I possibly can.
5 posts omitted

No.1197687 View ViewReplyOriginalReport
Where do I attach my grinder?
11 posts and 2 images omitted

No.1193853 View ViewReplyLast 50OriginalReport
what's a trade/profession that doesn't require thousands of dollars worth of tools?
83 posts and 11 images omitted

hole -> penny

No.1198223 View ViewReplyOriginalReport
How can I bear/bore a whole through a penny with household objects or chemicals?

I have no immediate access to power tools but I do have some screwdrivers (star-pointed) and a hammer.
9 posts and 3 images omitted

Removing rust and painting over scratches on car

No.1195288 View ViewReplyLast 50OriginalReport
So my mom scratched up the side of her car a while ago and she only told me about it now. The scratches are surface level and the several rust spots are about 1 inches by 5 inches big. I figure I'll do the repairs myself since the rust spots are pretty small and it's an old ass beater car.

I've never done this before though so I'm not too sure of the process involved, and I have no tools either. I'm thinking I need to get sandpaper first to sand off the rust first (what grit?) then prime over the bare metal? Is there a special primer I need for this or can I just get any primer that goes on metal? What paint do I need and will I need to apply some sort of top coat at the end? It's a shitty old car so I don't care if the colors don't match up exactly or whatever. I just want to fix up the scratches.

Pic related from google except with more rust spots
69 posts and 10 images omitted

Need Machinist Will Pay

No.1192871 View ViewReplyLast 50OriginalReport
Need machinist for custom sinker molds. Blogpost in the comments if interested.
70 posts and 14 images omitted

No.1198173 View ViewReplyOriginalReport
any of you made his own miner ? if so I'm really eager to learn from you.
5 posts and 2 images omitted